STRUCTURES FOR PV MODULES
Mounting structures by KNESS for ground- based and rooftop solar stations are a combination of simplicity and functionality, optimal metal consumption, reliability and efficiency — the best characteristics all in one product
Ensuring comprehensive approach
With many years of experience in the solar energy industry, including as an EPC contractor, we know the full life cycle of metal structures implementation.
resistance to atmospheric loads
optimal tilt angle
of PV modules
galvanized
steel
10 - year
warranty
simple
installation
flexible
design
optimal
metal content
adaptable to any type of PV system
Metal structures for ground-mounted solar power plants
for different terrain
PVMS-2RV-XX-2L
Two-support static metal structure with portrait 2-row arrangement of PV modules
Learn more
- customizable to support a range of 4 to 30 PV modules, providing options for specific requirements
- versatile mounting system
- adaptable to different sizes of PV modules and types - mono and bifacial
- resistance to atmospheric loads (wind, snow, etc.)
- resistance to thorough corrosion due to a special coating
- adaptable to complex terrain while maintaining the specified tilt angle of PV modules
PVMS-4RH-XX-2L
Two-support static metal structure with landscape 4-row arrangement of PV modules
Learn more
- customizable to support a range of 4 to 16 PV modules, providing versatile options for specific requirements
- optimized metal content
- pre-assembled design ensures simplicity of installation;
- adaptable to different sizes of PV modules and types - mono and bifacial
- resistance to atmospheric loads (wind, snow, etc.)
- resistance to thorough corrosion
- adaptable to complex terrain while maintaining the specified tilt angle of PV modules
Metal structures for rooftop solar power plants
for roofs of various shapes and covering
PVMSR-SG-PCF
Rooftop mounting structure fastened with a special high-strength adhesive and adaptable to uneven roofs and shapes
Learn more
- mounted without any holes using a special glue
- maintains the integrity, waterproofing and thermal insulation of the roof
- exerts minimal pressure on the roof and has a flexible design
- resistance to atmospheric loads (wind, snow, etc.)
PVMSR-MB-DCF/-SCF
Rooftop mounting structure with ballast fastening system for membrane roofs
Learn more
- made of galvanized steel
- dual-pitched arrangement with an east-west orientation (DCF) or a single-sided arrangement with a south orientation (-SCF)
- a customized ballast system, carefully chosen and calculated for the project's requirements, considering atmospheric loads
- installed on rubber pads, which prevents damage to the membrane coating and reduces pressure on the roof
- resistance to atmospheric loads with minimal pressure on the roof (maximum long-term local pressure on the roof is up to 25 kPa)
- solar cable laying ensures accessible contact connections for visual and thermal inspections
PVMSR-CB-DCF/-SCF
Rooftop mounting structure with ballast fastening system for roofs with concrete and roofing felt coating
Learn more
- made of galvanized steel
- dual-pitched arrangement with an east-west orientation (DCF) or a single-sided arrangement with a south orientation (-SCF)
- fixed by a ballast system, carefully chosen and calculated for the project's requirements, considering atmospheric loads
- installed on rubber pads, which prevents damage to the roof and protects the metal from water
- resistance to atmospheric loads with minimal pressure on the roof (maximum long-term local pressure on the roof is up to 25 kPa)
- solar cable laying ensures accessible contact connections for visual and thermal inspections
Find out details
or order by phone
+38 067 430 59 86
or with the help of
contact form:
